For more details, download the complete price list in Adobe Acrobat format.

• Stop Buttons

• Tool Servicing

  

  • H.S.S. Endmills

  • Carbide Endmills

  • Large Endmills

  • Roughing Endmills

  • Drills/Reamers/Taps

  • Counter Bores & Spot Face

  • High Performance Drill/End Mill/Spade Blades with coating.

• Coating Applications

• Stop Buttons

• Tool Servicing

• H.S.S. Endmills

Size	2 Flute		3 & 4 Flute		6 Flute
	Square End	Radius / Ballnose	Square End	Radius / Ballnose	Square End	Radius / Ballnose
.000 to .500	$8.34	$10.74	$9.54	$11.94	$15.54	$31.14
.501 to .750	$9.54	$13.14	$11.94	$14.34
.751 to 1.000	$11.94	$14.34	$14.34	$16.74
1.001 to 1.250	$14.34	$17.94	$16.74	$19.14	$22.74	$44.34
1.251 to 1.500	$17.94	$22.74	$20.34	$23.94	$27.54	$55.14
1.501 to 1.750	$21.54	$26.34	$23.94	$29.94	$39.54	$79.14
1.751 to 2.000

• Carbide Endmills

Size	2 Flute		3 & 4 Flute
	Square End	Radius / Ballnose	Square End	Radius / Ballnose
.000 to .500	$10.74	$15.54	$13.14	$16.74
.501 to .750	$15.54	$19.14	$17.94	$22.74
.751 to 1.000	$20.34	$22.74	$22.74	$25.14
1.001 to 1.250	$23.94	$25.14	$27.94	$32.34
1.251 to 1.500	$29.94	$32.34	$31.14	$35.94
1.501 to 1.750	$39.54	$43.14	$43.14	$46.74

• Large Endmills

Size	Square End
2.000" Dia x 2.000"	$31.14
2.000" Dia x 3.000"	$34.74
2.000" Dia x 4.000"	$39.54
2.000" Dia x 5.000"	$43.14
2.000" Dia x 6.000"	$46.74
2.000" Dia x 7.000"	$50.34
2.000" Dia x 8.000"	$53.94

• Roughing Endmills

Size	Square End
.000 to .500	$10.74
.501 to .750	$13.14
.751 to 1.000	$16.74
1.001 to 1.250	$19.14
1.251 to 1.500	$22.74
1.501 to 1.750	$29.94
2.0" Dia x 3.0"	$35.94
2.0" Dia x 4.0"	$46.74
2.0" Dia x 5.0"	$51.54
2.0" Dia x 6.0"	$56.34
2.0" Dia x 7.0"	$56.34
2.0" Dia x 4.0"	$62.34
Add: 20% for excessive wear 20% for x-large 20% for cutoffs

• Drills/Reamers/Taps

Size	Carbide Drills	Reamers	Spade Drills with TiN Coat		Spiral Taps	Taps
.000 to .500	$11.94	$10.74	1-2 pcs. $33.60	3+ pcs. $46.80	$11.94	$10.74
.501 to .750	$15.54	$14.34			$15.54	$14.34
.751 to 1.000	$17.94	$16.74			$17.94	$16.74
1.001 to 1.250	$20.34	$19.14			$23.94	$17.94
1.251 to 1.500	$22.74	$22.74			$31.14	$23.94
1.501 to 2.000		$27.54				$27.54
2.001 to 3.000			$46.80	$57.60
3.001 +			$57.60	$70.80

• Counter Bores & Spot Face

Size	Bores & Spot Face
.000 to .500	$11.94
.501 to .750	$13.14
.751 to 1.000	$14.34
1.001 to 1.250	$15.54
1.251 to 1.500	$19.14
1.501 to 2.000	$20.34

Will also quote on the following:
Countersinks
Dove Tail Cutters
Woodruff Cutters

Add:
20% more for excessive wear
20% more for cutoffs

• High Performance Drill/End Mill/Spade Blades with coating

  • Coating prices vary with sizes.

• Coating Applications Coating prices

  • Balinit A - TiN (Gold)

    • General purpose coating for just about any type of application to increase tool life and maintain sharp edge and increase lubricity.

  • Balinit B - TiCN (Violet)

    • Higher hardness than TiN especially effective in tapping, drilling and endmilling in most machining applicaitons with coolant applied.

  • Balinit X.Treme - TiALN (Bronze)

    • Excellent for most types of machining applications and most notably when no coolant is used. Low friction coefficient allows greater chip evacuation and fights build up edge in aluminum.

  • Balinit ALCRONA - ALCrN (Blue - Grey)

    • high performance titanium/free coating. It is outstanding for levels of oxidation resitance and hot hardness. It's properties gives it exemplary wear resitance under both conventional conditions and severe mechanical stresses.